B-5270

For permanent installation, use upper round mounting holes. Mount unit with two sheet metal screws, furnished by manufacturer,
at points indicated by an S.
For installation where the entire unit may be removed from wall for emptying and cleaning, use lower keyhole slot mounting holes.
Using the container as a template, mark the location of the keyhole slots indicated by an S. Mount plastic bushings with screws
furnished by manufacturer. Container then snaps over bushings to hold unit in place.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheetmetal
screws furnished by manufacturer.
For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws furnished by manufacturer, or provide
3/16" (4.8mm) toggle bolts or expansion bolts.
For partitions with particle board or other solid core, secure with two sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws (not furnished) can be secured. If two units are
installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition

Container — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Front of container has same degree of arc
as front of lid and other Bobrick Matrix Series washroom accessories. Radius on corners and edges of container complement
corners and edges of lid and other Matrix Series accessories.
Lid — Durable, high-impact grey ABS with high-gloss finish on exposed surfaces. Fingertip handles for opening lid. Front of lid
has same degree of arc as front of container and other Bobrick Matrix Series washroom accessories. Radius on corners, edges and
top of lid complement corners and edges of container and other Matrix Series accessories. Secured to container with keyed pivots