B-354

Mounts in toilet partition 1/2" to 1-1/4" (13 x 32mm) thick, centered through a cutout specially ordered from partition
manufacturer or field cut. Dimensions of cutout are to be 11" wide x 15-1/2" high (280 x 395mm). For factory-made cutouts,
location and size details should be furnished to partition manufacturer. For hollow-core metal partitions, solid framing into
which mounting sheet-metal screws can be secured is required.
For installation with sheet-metal screws furnished, place unit firmly in partition opening, making sure the entire perimeter of
fixed flange is tight against partition surface, then secure to partition with sheet-metal screws furnished, through four holes
in fixed flange at points indicated by an S. On other side of partition, position adjustable flange so the mounting screw holes
are not inline with mounting screw holes in fixed flange. Make sure the entire perimeter of adjustable flange is tight against
partition surface, then secure with sheet-metal screws furnished.
For through-bolting method of installation, make sure that mounting holes in adjustable flange are inline with holes in
fixed flange. Using adjustable flange as template for locating centers, drill 7/32" or 1/4" (5.5 or 6.4mm) holes through
partition. Provide four binder post and #6 (3.5mm) flat-head sheet-metal screws to secure unit and its adjustable flange.
Obtain binder posts and sheet-metal screws by ordering Bobrick Binder Post Kit No. 354-119 for partitions 1/2" (13mm)
thick or Kit No. 354-124 for partitions 3/4" to 1-1/4" (19 to 32mm) thick.
Designer's Note: Cutouts in Bobrick toilet partitions can be pre-cut for Bobrick partition-mounted accessories at factory if
location and size of cutouts are specified and the order for both partitions and accessories are received together

Cabinet — 18-8 S, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flanges (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless
steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories.
Disposal Panels (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Bottom edges hemmed for
safety. Secured to door and permanent panel with spring-loaded, full-length stainless steel piano-hinges. Equipped with
international graphic symbols identifying sanitary napkin disposal.
Waste Receptacle — Leak-proof, rigid molded polyethylene. Removable for servicing. Capacity: 1.2 gal. (4.6 L)