B-2890

Mount unit on wall or toilet partition with five sheet metal screws (not furnished) at points indicated by an S. Rear edge of unit should be 20" (510mm) from back wall. This locates toilet tissue within 12" (305mm) of front of standard toilet that projects 30" (305mm) from back wall. For plaster or drywall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws (not furnished), or provide 6mm (1/4") toggle bolts or expansion bolts. For partitions with particle board or other solid core, secure with sheet metal screws (not furnished ), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.

Jumbo-roll toilet tissue dispenser door shall be 22-gauge (0.8mm) stainless steel with satin finish. Door shall be equipped with a lock not keyed like other Bobrick accessories. Door shall have a slot to reveal toilet tissue supply inside cabinet. Spindle adapter shall accomodate one toilet tissue roll up to 10" (255 mm) diameter with 3" (75mm) core. Spindle shall be converted int he field to dispense a 1-5/8" (40mm) diameter core roll by removing plastic spindle adapter. Spindle shall be converted in the field to dispense a 2-1/8" (55mm) diameter core roll by adding rubber o-rings (2) furnished. Manufacturer's service and parts manual shall be provided to the building owner/manager upon the completion of project.

Mounting Plate - 16 gauge steel with powder-coated finish.
Door - Type 430, 22 gauge (0.8mm) stainless steel with satin finish.