B-270

For partitions with particle-board or other solid core, secure with two #8 x 3/4'' (4.2 x 19mm) sheet-metal screws (not
furnished) at all points indicated by an S, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are
installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For masonry walls, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle
bolts or expansion bolts.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws

Container — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Integral finger depression for opening cover. Front of container has same degree of arc as front of cover and other Bobrick
Contura Series washroom accessories. Radius on side edges of container match corners and edges of cover and other
Contura Series accessories.
Cover — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front
of cover has same degree of arc as front of container and other Bobrick Contura Series washroom accessories. Radius on
corners and edges of cover match side edges of container and other Contura Series accessories. Secured to container with
a full-length stainless steel piano-hinge