Architectural Builders Supplyer Inc. /

Home   |   Welcome Guest!   |   Sign In?   |   My Account   |   Contact Us   |   Tracking   |  
Order online or call us 844-809-3667
Shopping Cart
Items in Cart: 0 Items Sub Total: $0.00 View Cart Checkout

Advanced Search

Bobrick  B-731 230V AirCraft TouchButton Hair Dryer Surface-Mounted

B-731 230V

Bobrick B-731 230V AirCraft TouchButton Hair Dryer Surface-Mounted

Manufacturer: Bobrick
Price: $0.00
Discontinued Item
Out of StockThis item is discontinued, we are unable to provide technical support and have no inventory remaining on hand. This item is kept in the database for informational purposes only.
Similar Product Video
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
Email Friend
This item ships from CA.
400 Series Door Closer
Bobrick B-731 230V Touch Button Hair Dryer
Item # Description
B-731 230V Bobrick B-731 230V Surface-Mounted AirCraft® Touch Button Hair Dryer
Vitreous enamel cast iron cover, white only
80-second drying cycle.
115V AC, 20 Amp, 2300 Watts, 50/60 Hz, or 208-240V, AC, 9-10 Amp, 1900-2300 Watts, 50/60 Hz, VDE approved and CE marked
Limited warranty: motor brushes for 3 years; all other parts for 10 years
Installation Instructions:

Wall Preparation: Provide framed rough wall opening 13-3/4'' wide x 9-1/2'' high (350 x 240mm). Minimum recessed depth required to finish face of wall is 3-3/4'' (95mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If installed in plaster wall, it is recommended that opening be grounded on all four sides with metal plaster trim. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange of mounting box and finish face of wall. If two units are installed back-to-back, a sound-barrier is recommended between units. Provide shims between framing and mounting box at all points indicated by an S, then secure with four #10 (M4.8) screws (not furnished). Provide electrical service from nearest distribution panel to recessed mounting box in conformance with local electrical codes

Cover — One-piece, minimum 1/8'' (3mm) thick, grey iron-casting is finished in high-gloss, acid-resistant, multicoat vitreous
enamel. Equipped with a two-position, self-returning, chrome-plated air-outlet nozzle. Graphic operating instructions are
permanently fused with vitreous enamel cover for maximum vandal- and wear-resistance. Air-outlet opening is equipped with
vandal-resistant grille. Cover is secured to base unit with two concealed, vandal-resistant, recessed hex-screws.
Recessed Mounting Box — 16-gauge (1.5mm) steel with baked enamel finish. Rust-resistant.
Base Unit — One-piece aluminum casting. Incorporates concealed, vandal-resistant air-inlet vanes on both sides and
Motor — Universal, 1/10 hp, 6200 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating
sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch.
Fan — Dynamically balanced, single-inlet centrifugal fan is mounted on motor shaft; directs airflow through heating element
at 150 cfmHeating Element — Coiled nickel-chrome heating element is mounted in mica frame and protected by an automatic
thermal-overload switch. Heating element, which is located on inlet side of fan, heats air without hot spots — inaccessible to
Electronic Control — Infrared sensor automatically turns dryer on when hands or self-returning nozzle are held under
air-outlet opening and across path of sensor. Remove hands or release self-returning nozzle from path of sensor and dryer
stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is
placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer
operates normally
  Architectural Builders Supply product suggestions:  
Bobrick B-708 115V AirGuard Automatic Hand Dryer Cast Iron Cover
Surface-mounted automatic hand dryer
Price: $1,292.03
Bobrick B-731 115V AirCraft TouchButton Hair Dryer Surface-Mounted
DISCONTINUED -Bobrick recessed automatic hand dryer
Price: $0.00
Questions and Answers
Q: What replace the Bobrick B-731 TouchBotton Hair Dryer
A: Bobrick does not sell any hair dryer products anymore. Would you be interested in reviewing the American Dryer line of hair dryers? If so, this is a helpful link to get you started:

Download File

Is there a follow up question that we can perhaps attempt to answer? We take pride deep in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.

Please reply to this email or contact our sales department here:

Click Here

if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.

Customer Reviews
There are no customer reviews yet.
Be the first to Write a Review

Check out our helpful video gallery.

Corporate Members of DHI
AAADM Certified!