 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
ASI 9460 |
ASI 9460 Paper Towel Dispenser and Waste Receptacle
|
| |
| Manufacturer: ASI |
| Price: $696.04
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
|
PROFILE COLLECTION RECESSED PAPER TOWEL DISPENSER AND WASTE RECEPTACLE |
|
|
Dispenses 600 C-fold,
800 Multi-fold, or 1100 Single-fold paper towels. Removable 10.5 gal. (39.7 L)
stainless steel waste container.
Wall Opening: 12 3⁄4" x 72 1⁄2" x 6 1⁄4"
(325 x 1840 x 160 mm).
Suggested Mounting Height: 4" (102 mm) from bottom of unit to floor. |
SPECIFICATION |
| Profile Collection Recessed Paper Towel Dispenser and Waste Receptacle Unit shall hold and dispense 800 standard multi-fold or
600 standard C-fold paper towels or 1100 standard single-fold paper towels and shall have a waste capacity of 10.5 gal (40liters).
Cabinet and dispenser units shall be fabricated of alloy 18-8 stainless steel, type 304, 20 gauge with 1′′ (25mm) wide perimeter trim
to lay flush against wall. Full face door shall be 16 gauge and shall be free of miters, welding or open seams with 15/16′′
(24mm) square horizontal returns to wall and 3/4′′ (25mm) vertical edges. Door shall be attached to the edge of unit with a full
length 3/16′′ (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with two (2) rimless tumbler locks
keyed alike to other ASI washroom equipment. Towel dispensing slot shall have a fully deburred edge for snag-free dispensing
and user safety. An integral adjustable towel guide shall be provided to allow change over from single-fold to C-fold and to multifold
towel styles. Waste receptacle shall be fabricated of stainless steel with hemmed edges and a rolled-edge finger-hole for ease of
service removal and maintenance safety. Structural assembly of body and door components shall be of welded construction. All
exposed surfaces shall have No 4 satin finish. |
INSTALLATION |
Unit is mounted in wall recess using No 10 self tapping screws (by others) through concealed mounting holes provided. Typical
suggested mounting height is 4′′ (102mm) from bottom of unit above finished floor. Note that bottom of RWO is 3/4′′ (19mm)
above bottom of unit.
Rough Wall Opening (RWO) required is ..…… 12-3/4′′ ′′ W x 72-1/2′′ ′′ H x 6-1/4′′ ′′ D min (324mm x 1842mm x 159mm) |
OPERATION |
| Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Waste container is emptied manually on cycle determined by maintenance needs. Adapter (provided) allows alternating between
single-fold, C-fold and multi-fold dispensing at time of loading for a single type per load. |
 |
|
|
|
Customer Reviews
There are no customer reviews yet.
|
|
|