SURFACE MOUNT PAPER TOWEL DISPENSER AND WASTE RECEPTACLE
| Similar to 64676, but with stainless steel collar for surface mounting.
|Recessed Paper Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard C-fold
or 1100 standard single-fold paper towels and shall have a waste capacity of 7 gal (26.5liters). Towel dispenser, door, frame,
waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304. Cabinet shall be No 20 gauge, with a 1′′
(25mm) wide perimeter return to lay flat against wall. Full face door shall be No18 gauge with a 1/2′′ (13mm) square return to
wall with no visible open seams on door face. Door shall be attached to the cabinet at side with a full length 3/16′′ (5mm) dia.
stainless steel multi-staked piano hinge and shall be held closed with tumbler locks keyed alike to other ASI Washroom Equipment. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Waste container shall
have hemmed edges for safety. Structural assembly of all components shall be of welded construction. Waste receptacle door
shall be attached to cabinet with a spring-loaded stainless steel piano hinge and shall have the international waste symbol on
face. Adjustable guide shall be provided to allow dispensing of single-fold, multi-fold or C-fold paper towels..
Unit is mounted in wall recess using No10 self tapping screws (by others) through concealed mounting holes provided. Note
that top of rough wall opening is 3/4′′ (19mm) below top of unit.
Rough Wall Opening required is...…… 11-1/2′′ ′′ W x 53-1/2′′ ′′ H x 6′′ ′′ D. minimum (292mm x 1359mm x 152mm)
|Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed
properly. Waste container is emptied manually on cycle determined by maintenance needs. Adapter permits changing from Cfold
to multi-fold towel dispensing.