ASI 3702-54P

Name: ASI 3702-54P 54" Straight Grab Bar with Snap Flanges and Peened Grip
Brand: ASI
SKU: ASI 3702-54P
Price: 95.90 USD

ASI 3702-54P 54" Straight Grab Bar with Snap Flanges and Peened Grip

× This image is for a similar product but it will differ in size, color and/or other attributes.

Price: $95.90 USD

Comments (Optional)

For quantities beyond the "In Stock" above, the item(s) ships in 4 business days.

Sales

Technical Support

Product Description:

ASI 54" Straight Grab Bar with Snap Flanges and Peened Grip

Dimensions

A = 54"

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Use grab bar as template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.

Optional Mounting Kits

3901 Dry Wall Anchors
- #12 x 2-1/23 long self tapping phillips pan head screws
3930 Concrete or Masonry Wall Anchors
- 1/4 -20 x 2" long machine screws with matching lead expansion-shields
3931 Dry Wall Anchors with Toggles
- 1/4-20 x 2" long machine screws with matching toggles
3932 1/2" Thick Metal Partion Anchors
- 3" (76mm) dia. plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded-onto concealed side
3933 3/4" - 1" Thick Metal Partion Anchors
- 3" (76mm) diameter plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded onto concealed side
3934 Back to Back Mounting on 1/2" Thick Metal Partition Anchors
- For back to back mounting on 1/2" thick metal partitions
- 1/4-20 x 1-1/4" long machine screws with corresponding hex nuts and washers