Name: ASI 3702-48 48" Straight Grab Bar with Snap Flanges
Brand: ASI
SKU: ASI 3702-48
Price: 81.71 USD

Architectural Builders Supply Inc. / ABSupply.net

Order online or call us 844-809-3667

Items in Cart: 0 Items

Sub Total: $0.00

Access Panels

Bathroom Hardware

Builders Hardware

Commercial Display Hardware

Complete Door Units

Door & Frame Components

Door Closers

Electrified Hardware

Exit Devices

Fans & Lighting

Fire Safety

Floor Doors

Foodservice Products

Glass

Hinges & Pivots

Janitorial Supplies

Key Cabinets

Locksets & Deadbolts

Medical Accessories

Metal Doors

Metal Frames

Millwork

Office Supply

Overhead Stops & Holders

Plumbing

Postal Accessories

Roof Hatches

Sliding Door Hardware

Storage & Garage Organization

Storefronts & Entrances

Tools & Accessories

Trim & Auxiliary

Weatherstripping

Window Hardware

Wood Doors

Home > Bathroom Hardware > Grab Bars > Straight > 1-1/4" Diameter > Snap Flange > Non-Peened Grip > ASI 3702-48

ASI 3702-48 48" Straight Grab Bar with Snap Flanges

ASI 3702-48
ASI 3702-48 48" Straight Grab Bar with Snap Flanges

Manufacturer: ASI
Price: $81.71

Order Options:

Comments (Optional)

Qty:

Availability Information

Standard - ships in 4 business days with $82.50 minimum purchase of ASI products or 15 business days for smaller orders.

ASI has a minimum order requirement. Orders smaller than the required minimum have a longer lead time as we need to consolidate onto a "stock" order. If you need a faster lead time, simply exceed the minimum order amount.

About Us Video

More from ASI

ASI 48" Straight Grab Bar with Snap Flanges

Snap-on flange covers for concealed mounting
Tubing: 1-1/4" (32mm) diameter x 18 gauge (1.2mm)
Flange: 3-1⁄8" (79 mm) diameter, 1⁄8" (3 mm) thick
Flange cover: 3-3⁄16" (81 mm) diameter
Satin stainless steel

Cut Sheet

Dimensions

A = 48"

Strength

Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.

Installation

Use grab bar as template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.

Optional Mounting Kits

3901 Dry Wall Anchors
- #12 x 2-1/23 long self tapping phillips pan head screws
3930 Concrete or Masonry Wall Anchors
- 1/4 -20 x 2" long machine screws with matching lead expansion-shields
3931 Dry Wall Anchors with Toggles
- 1/4-20 x 2" long machine screws with matching toggles
3932 1/2" Thick Metal Partion Anchors
- 3" (76mm) dia. plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded-onto concealed side
3933 3/4" - 1" Thick Metal Partion Anchors
- 3" (76mm) diameter plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded onto concealed side
3934 Back to Back Mounting on 1/2" Thick Metal Partition Anchors
- For back to back mounting on 1/2" thick metal partitions
- 1/4-20 x 1-1/4" long machine screws with corresponding hex nuts and washers