Your cart is currently empty.
CALL - TEXT - FAX
Glossary of Hardware Terminology
ASI 3502-48 48" Straight Grab Bar
This image is for a similar product but it will differ in size, color and/or other attributes.
This product review video is for a similar product but it will differ in size, color and/or other attributes.
1. Select Mounting Kit
3900 - 3 Pan Head Sheet Metal Screws 2-1/2" long (Add $11.40)
3920 - 3 Pan Head Sheet Metal Screws 3-1/2" long w/expansion shields (1per Flange) (Add $17.40)
3924 - Kit to Mount 2 Grab Bars Back-to-Back thru 1/2" Thick Partitions, 1 Per Flange Pair (Add $10.80)
3925 - Kit to Mount 2 Grab Bars Back-to-Back thru 3/4" to 1" Thick Partitions, 1 Per Flange Pair (Add $31.20)
In Stock Ready for Shipment
ADD TO CART
An order for quantities beyond our Immediate availability above
ships in 4 business days.
+ Add to My Wish List
ASI 48" Straight Grab Bar
Tubing: 1-1/2" (38mm) diameter x 18 gauge (1.2mm)
Flange: 3" (76 mm) diameter, 1⁄8" (3 mm) thick
Exposed mounting screw holes are drilled and countersunk
Satin stainless steel
A = 48"
Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Use grab bar as template to mark mounting holes locations and pre-drill holes.
Install bar using three (3) No10 self-tapping pan head screws (not supplied) or other fastener system (not supplied) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be install so that center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF.
Optional Mounting Kits
3900 Dry Wall Anchors
#12 x 2-1/23 long self tapping phillips pan head screws
3920 Concrete or Masonry Wall Anchors
12-24 x 1-1/2" long machine screws with matching lead expansion-shields
3924 1/2" Thick Metal Partition Anchors
For back to back mounting on 1/2" thick metal partitions
1/4-20 x 1/2" long female threaded posts with 1/4-20 x 3/8" long Phillips pan head machine screws
3925 3/4" Thick Metal Partition Anchors
For back to back mounting on 3/4" thick metal partitions
1/4-20 x 3/4” long female threaded posts with 1/4-20 x 3/8" long phillips pan head machine screw
Questions and Answers
There are currently no questions or answers.
(Required, used to email you once question is answered.)