 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
ASI 3201-36P |
ASI 3201-36P 36" Straight Grab Bar with Peened Grip
|
| |
| Manufacturer: ASI |
| Price: $67.71
|
| |
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
|
| ASI 36" Straight Grab Bar with Peened Grip |
|
 |
- Concealed Mounting
- Tubing: 1-1/2" (38mm) diameter x 18 gauge (1.2mm)
- Flange: 3" (76 mm) diameter, 1⁄2" (13 mm) deep
- Three (3) tamper resistant 1/4-28 stainless steel hex socket set screws supplied for each flange
- Satin stainless steel
|
|
|
| Dimensions |
|
|
A = 36" |
|
| Strength |
|
- Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
|
|
| Installation |
|
- Tenon plates are secured to wall with a 1/4" bolt (by others) through an elongated slot that provides 1" (25mm) vertical range and 3/16" (5mm) horizontal range for fitting adjustment.
- Flanges are then fitted over tenon plates and secured by tightening the hex socket set screws (provided).
- For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing.
- Anchors are available from ASI (see below)
|
|
| Optional Mounting Kits |
|
- 3902 Dry Wall Anchors
- #12 x 2-1/2" long self-tapping Phillips pan head screws
- 3912 Metal Partition Anchors
- For installing through 1/2" - 1" metal partitions
- 3/16′′ (5mm) thick stainless steel plate x 3′′ (76mm) dia., with a 1/4-20 x 1-1/2" (38mm) long threaded steel rod welded on with a washer and nut to suit
|
|
| Optional Anchor Plate |
|
- 3919 In Wall Anchor Plate
- Anchor is drilled and screwed, welded or wired to face of stud system or partition in exact mounting location to suit field conditions prior to application of finishing wall material.
- 1/8′′ thick x 2" wide x 44" length
|
|
|
Customer Reviews
There are no customer reviews yet.
|
|
|