 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
ABH 2100 |
ABH 2100 Electromagnetic Recessed Wall Mount Door Holder
|
|
Manufacturer: ABH |
Price: $259.34
|
|
|
Buy
4
or more and pay $199.34 each (save $60.00)
|
Buy
8
or more and pay $156.34 each (save $103.00)
|
|
|
|
|
|
|
|
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
|
|
 |
ABH 2100 Recessed Wall Mount for Standard Doors |
|
|
WHEN ORDERING, please list:
- Model Number
- Total Projection
- Door Thickness
- Voltage
- Finish
|
|
|
- For use on fire/smoke barrier doors hold open until released by a remote switching device. Can also be used to just hold door.
|
- Total projection - 2-5/8" 3-5/8" with one 1" extension
|
- Special Electrical Circuit field selectable Tri-Voltage - 12V DC, 24V AC/DC, 120V AC
|
|
- Easy wire installation with quick insert connector
|
- Stainless steel face plate available
|
- Available in US28, Sprayed finishes and US32D
|
- Armature is through bolted for security and can be provided with any projection required.
|
- Armature extensions available for unlimited projections and/or 120° Swivel Extension
|
- Armature design will compensate for centerline misalignment up to 1/4" with double swivel and pivoting ball
|
|
- California State Fire Marshall Listed
|
- City of New York MEA Approved
|
|
- Meets ANSI/BHMA requirements 156.14
|
|
Type of metal finish |
BHMA/ANSI |
US Standard |
Standard |
|
US28 |
Stainless Steel, Bright |
|
US32 |
Stainless Steel, Satin |
|
US32D |
Sprayed |
|
|
 |
 |
|
The newly designed 2000 Series Electro-magnetic Door Holders is now Tri-Voltage. Each model (except 2500) can be wired 12V DC,
24V AC/DC or 120V AC. Units can be used on fire/smoke barrier doors held open until released by a remote switching device. They
can also be used to just hold a door open. The armature is thru-bolted to the door for security and can be provided with any
projection required. When ordering indicate model, total projection, finish and door thickness if other than 1-3/4”.
• 30-45 pound holding power
• Underwriters US and Canada Listed
California State Fire Marshal Listed
New York City MEA
ANSI/BHMA 156.14
• Most models available in US28, sprayed finishes and US32D |
|
|
|
|
|
|
|
Questions and Answers
Q: Are we able to order just the armature extensions? A: You sure can. What length do you need? Q: I would need 2 sets. 16 inches long with 2 sets of swivels each. A: The 16" extension is here: Click Here and should contain everything needed. Q: Can I use my Radionics D7024 fire alarm panel as seen here: View Image to control the dropping out or the opening of the circuit for the ABH 2100 Electromagnetic Recessed Wall Mount Door Holder? A: Most certainly you can. The manual for the Radionics D7024 can be viewed here: Download File
You will want to review the section 2.2.4 Relays and be sure through the software to reset the relay so that it operates the way in which you require it to do so. You would set the relay to utilize the common and normally open portion of the relay in this will allow you to power your electromagnetic door holders which will keep the doors open at all times until there is a fire alarm condition present on the panel which will then set the relay to its natural state which because you're using normally open would cut the power through the relay allowing your doors to the energized and therefore closed via the normal mechanical hardware installed on the doors..
For further questions I would recommend that you contact the manufacturer directly and their phone number can be found on the very bottom of the very last page of the manual. Q: What wires can we use if 120Volts AC will be the supply voltage of the electromagnetic door holder? A: Run your not and neutral to the common and 120v terminals as seen in the installation instructions here: Download File
(Required, used to email you once question is answered.)
Customer Reviews
There are no customer reviews yet.
|
|
|