B-166 1836

Availability: Ships directly from the manufacturer within 2-3 bussiness days of order placement.

• Channel Frame Stainless Steel Plate Glass Mirror with Shelf
• Width: 18"
• Height: 36"
• Frame: 1/2" x 1/2" x 3/8" channel-frame
• Type 430 stainless steel with bright-polished finish
• One piece frame with 90 degree mitered corners
• Frame screw permits easy replacement of glass
• Shelf: Type 304 satin-finish stainless steel
• Shelf projects 5' with 3/8" return on front and sides; front return edge hemmed for rigidity and safety
• Reflective Surface: 1/4" thick plate glass, warranted against silver spoilage for 15 years
• Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bottom to prevent the bottom of the mirror from pulling away from the wall.
• Mirror corners are protected by friction-absorbing filler strips; back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, 3/16" thick polyethylene padding.
• Secured to concealed wall hanger with theft-resistant mounting

• Mount wall hanger on wall with screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide ?ber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts. Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed ?at against the wall approximately 1" (25mm) above ?nal position and then lowered into ?nal position.
• Screw Locking Design — Lock mirror to wall hanger by tightening Phillips-head locking screws that are concealed in the bottom of frame at points indicated by a T (see ?gure 2). Mirror may be unlocked from wall hanger by loosening locking screws and lifting mirror off of concealed wall hanger.
• Concealed Wall Hanger — 20-gauge (9.0mm) galvanized steel. Incorporates lower support member, forming rigid rectangle, which engages lower backplate louvers to keep bottom of mirror against wall.