 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
RNB-FD3670 |
3'6 x 7'0 Fire Rated Birch Wood Door
|
| |
| Manufacturer: ABS |
| Price: $689.18
|
|
| |
|
Buy
12
or more and pay $654.72 each (save 5.00%)
|
|
Buy
36
or more and pay $620.26 each (save 10.0%)
|
|
Buy
72
or more and pay $585.80 each (save 15.00%)
|
|
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
ABS features a lifetime warranty on our fire rated commercial wood doors.
Choosing the right fire door is determined by your building code and the local building and fire inspectors. | Our FIRE RATING MINERAL CORE DOOR's are used in commercial, institutional and residential applications. Fire doors are commonly found in stairwells and walls providing fire separation. ABS's fire door are built to the highest architectural quality standards. All FIRE doors are shipped prefit 3/16" in the width and 5/8" height. If your needs are different than this standard, please contact us directly. Fire door requirements require all fire doors to be machined in our shop. Fire doors cannot be shipped, slab (not machined ) with the labels attached. If your machining requirements exceed those listed above, please click on our "machining sheet" link to help complete your order and contact us directly to the place your order. 1 3/8" fire doors are not available | | CONSTRUCTION | Bonded 5 Ply Hot Press or 7 Ply Cold Press | | CORE | Incombustible mineral core | THICKNESS | 1 3/4" | | STILES | 5/8" mill option. Matching outer edges optional | | RAILS | Top Rail -1/4"; Bottom Rail - 1 1/16"; Blocking reinforcement available | | CROSSBANDS | 1/12" select hardwood with grain running 90° to face veneer | | FACES | Wood veneer, plastic laminate and MDO (optional) | | ADHESIVE | Type II (water resistant)
Type I (water-proof) available | | FIRE RATING | 45-90 Minute, Neutral & Positive Pressure | | DOOR DETAILS | Contact ABS Sales for details and labeling approvals | | MAXIMUM SIZES | Neutral Pressure
45 & 60 minute singles: 4-0 x 10-0
45 & 60 minute pairs: 8-0 x 9-0
Positive Pressure
45 & 60 minute singles:4-0 x 9-0
45 & 60 minute pairs, including double egress: 8-0 x 9-0
Neutral/Positive Pressure
90 minute singles: 4-0 x 9-0
90 minute pairs, including double egress: 8-0 x 9-0
Listed concealed vertical rods-Neutral Pressure
45-90 minute pairs: 8-0 x 9-0
45-90 minute pairs: 8-0 x 9-3 with metal edges
Contact ABS personnel for labeling restrictions |
| | | | Contact Information | | | 877-631-9411 Contact Architectural Builders Supply for installation support and information ! | Cutting Graphic | Cutting Explained | | |  | ROTARY CUT
The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple | | | | PLAIN SLICING
The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli | | | QUATER SLICING
The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied ion others | | | RIFT CUT
Cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter |
ABS STANDARD | | GRADE DESCRIPTION | "A" | | COLOR AND MATCHING | | | Sapwood | Yes | | Heartwood | Yes | | Color Streaks or Spots | Yes | | Color Variation | Yes | | Sharp Color Contrasts at Joints | No | | TYPES OF MATCHING | | | Book Matched | Yes | | Slip Matched | Specify | | Pleasing Matched | N/A | | Random Matched | Specify | | End Matched | Specify | | Nominal Minimum width of Face Components | Plain Sliced = 5"
Quartered = 3"
Rotary = 5"
| NATURAL CHARACTERISTICS | | Small Conspicuos Burls & Pin Knots Combined AVG Number | 1 per 3 sq. ft. max. 10 in and 32 sq. ft. contiguous | | Conspicuous Burls Max Size | 3/8" | | Conspicuous Pin Knots AVG Number | 1 per 8 sq. ft. max. 4 in and 32 sq. ft. contiguous | | Max. Pin Knot Size - Dark Part | 1/8" | | Max, Pin Knot Size - Total | 1/4" | | Scattered Sound and Repaired Knots - Combined Avg. Number | No | | Max. Size - Sound | No | | Max. Size - Repaired | No | | Avg. Number - Repaired | No | | Mineral Streaks | Slight | | Bark Pockets | No | | Worm Tracks | No | | Vine Marks | Slight | | Cross Bars | Slight | MANUFACTURING CHARACTERISTICS | | Rough Cut | No | | Blended Repaired Tapered Hairline Splits | Two 1/16"x 6" | | Repairs | Small Blending | | SPECIAL CHARACTERISTICS | UNFILLED WORM HOLES, OPEN SPLITS, OPEN JOINTS, OPEN BARK POCKETS, SHAKE OR DOZE NOT PERMITTED IN ABOVE GRADES | ALL DATA REFERENCED FROM A.W.I. 7 TH EDITION, VERSION 1.0.1997 SECTION 1300 |
|
Customer Reviews
There are no customer reviews yet.
|
|
|