 |
|
Order online or call us 844-809-3667
|
|
Items in Cart: 0 Items |
Sub Total: $0.00 |
 |
 |
|
|
|
|
|
|
|
|
|
| |
|
|
RNB-SC3090 |
3'0 x 9'0 Architectural Solid Core Birch Wood Door
|
| |
| Manufacturer: ABS |
| Price: $561.18
|
|
| |
|
Buy
12
or more and pay $533.12 each (save 5.00%)
|
|
Buy
36
or more and pay $505.06 each (save 10.0%)
|
|
Buy
72
or more and pay $477.00 each (save 15.00%)
|
|
|
| |
|
| |
| |
| |
|
|
|
This product review video is for a similar product but it will differ in size, color and/or other attribute. We still feel the video will be of value to you.
|
|
 |
|
 |
|
| |
ABS features a lifetime warranty on our ARCHITECTURAL SOLID CORE rated commercial wood doors.
| Our Architectural particleboard wood doors are built to the highest quality standards as defined by AWI section #1300. This door can be special ordered in all domestic and exotic species of wood. Birch, Oak, Maple, Mahogany, Walnut and Cherry can be ordered directly at www.absupply.net. This door meets or exceeds all architectural specifications for construction and quality standards. These doors feature a fully bonded core. This means the stiles and rails are securely attached to the core with adhesives and then are abrasively planed before veneering. This step works to ensure minimal telegraphing of core parts through veneers. These doors are used in commercial, institutional and residential applications. Factory prefinishing, fully compliant with AWI standards, is available on special order. If your machining requirements exceed those listed above, please click on our "machining sheet" link to help complete your order and contact us directly to the place your order. 1 3/8", 2â€, 2 1/4 †and other thicknesses available on special order. Dutch doors, wicket doors and lead lined doors can also be special ordered. | ARCHITECTURAL SOLID CORE WOOD DOOR | | CONSTRUCTION | Bonded 7 Ply | | CORE | Bonded particleboard conforming to ANSI A 208.1 1 LD-2 | THICKNESS | 1 3/4" | | STILES | 1 3/8" Matching hardwood or softwood. Wider stiles available | | RAILS | 1 1/2" Mill option. Wider rails available | | CROSSBANDS | 1/12" select hardwood with grain running 90° to face veneer | | FACES | Wood veneer, plastic laminate and MDO | | ADHESIVE | Type II (water resistant)
Type I (water-proof) available | | FIRE RATING | 20 minute - 1 3/4" thick doors only | | DOOR DETAILS | Lite and louver openings not to exceed 54" in length or 40% of the door. Max 1296" for 20 min label | | MAXIMUM SIZES | Singles: 4-0 x 10-0
Pairs: 8-0 x 10-0
DE Pairs: 8-0 x 8-0 | | | | | Contact Information | | 877-631-9411 Contact Architectural Builders Supply for installation support and information ! |
 | TOP and BOTTOM HORIZONTAL EDGE | | 2 1/4" minimum solid wood or structural composite lumber, one piece or laminated (before trim) | | VERTICAL EDGE | | 1 9/16" minimum hardwood; solid, laminated or veneered (before trim). Backer or inner ply may be structural composite lumber. Same species visible surface, sanded ease, no visible joints allowed | | | | CORE | | Particleboard, ANSI A208.1, grade LD-2 | | CORE/EDGE INTERFACE | | Stiles & rails securely bonded to core, then entire unit abrasively planed before veneering | | BACK VENEER | | CROSSBAND | | Edge glued or one piece without voidsor show through | | VENEER FACE | | Minimum 1/50" "A" grade edge glued joints. 1/8" hardboard 60 lb. ANSI A 135.4 | | VENEER MATCH | | Book, slip or random; Centered, balanced or running; Pair and set match | | LIGHTS, LOUVERS and MOULDING | | Same species lumber, or vennered or metal vision frames | | TRANSOMS | | Bottom horizontal edge runs full width. Matching species lumber or vennered | | FIELD TRIM | | Width = Max. 1/2" when taken equally from both stiles | | Height = Max. 1 1/2" when taken equally from both rails | | Cutting Graphic | Cutting Explained | | |  | ROTARY CUT
The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple | | | | PLAIN SLICING
The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli | | | QUATER SLICING
The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied on others | | | RIFT CUT
cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter |
ABS STANDARD | | GRADE DESCRIPTION | "A" | | COLOR AND MATCHING | | | Sapwood | Yes | | Heartwood | Yes | | Color Streaks or Spots | Yes | | Color Variation | Yes | | Sharp Color Contrasts at Joints | No | | TYPES OF MATCHING | | | Book Matched | Yes | | Slip Matched | Specify | | Pleasing Matched | N/A | | Random Matched | Specify | | End Matched | Specify | | Nominal Minimum width of Face Components | Plain Sliced = 5"
Quartered = 3"
Rotary = 5"
| NATURAL CHARACTERISTICS | | Small Conspicuos Burls & Pin Knots Combined AVG Number | 1 per 3 sq. ft. max. 10 in and 32 sq. ft. contiguous | | Conspicuous Burls Max Size | 3/8" | | Conspicuous Pin Knots AVG Number | 1 per 8 sq. ft. max. 4 in and 32 sq. ft. contiguous | | Max. Pin Knot Size - Dark Part | 1/8" | | Max, Pin Knot Size - Total | 1/4" | | Scattered Sound and Repaired Knots - Combined Avg. Number | No | | Max. Size - Sound | No | | Max. Size - Repaired | No | | Avg. Number - Repaired | No | | Mineral Streaks | Slight | | Bark Pockets | No | | Worm Tracks | No | | Vine Marks | Slight | | Cross Bars | Slight | MANUFACTURING CHARACTERISTICS | | Rough Cut | No | | Blended Repaired Tapered Hairline Splits | Two 1/16"x 6" | | Repairs | Small Blending | | SPECIAL CHARACTERISTICS | UNFILLED WORM HOLES, OPEN SPLITS, OPEN JOINTS, OPEN BARK POCKETS, SHAKE OR DOZE NOT PERMITTED IN ABOVE GRADES | ALL DATA REFERENCED FROM A.W.I. 7 TH EDITION, VERSION 1.0.1997 SECTION 1300 |
|
Customer Reviews
There are no customer reviews yet.
|
|
|