Home > Wood Doors > Architectural Doors > Red Oak > Particle Core > PSRO-PC3070

PSRO-PC3070

3'0 x 7'0 Particleboard Core Red Oak Wood Door

× This image is for a similar product but it will differ in size, color and/or other attributes.

3'0 x 7'0 Particleboard Core Red Oak Wood Door

+ Add to My Wish List

Quote Only Item

This item must be quoted prior to order. Please Contact Us for further details.

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

				Warranty
	Recommended Handing	Glossary	Finishing Tips	Warranty

Our PARTICLE BOARD CORE DOORS, AWI specification FPC-9, are for standard residential use or economy commercial applications. The standard features of this door are one piece stiles (not finger jointed), particle board core and can be rated for up 20 minute. There doors carry our one year warranty for interior applications. Since not every application calls for an architectural solid core door, this economy door is a dependable alternative. This door is well suited for commercial tenant build-out or commercial retail jobs where cost is a primary concern along with quality. These doors are available 1 3/4" or 1 3/8" thick. Additionally special sizes are also available. Please contact our sales office directly for your custom size door needs

PARTICLE CORE WOOD DOOR

CONSTRUCTION	Floating particle core
CORE	particleboard which complies with ANSI A208.1 1-LD2 or 1-LD1
THICKNESS	1 3/4", 1 3/8"
STILES	1-1/4" min. (before trim) Structural Composite Lumber (SCL) with compatible veneer band or decoraive laminate
RAILS	2-1/4" min. (before trim) mill option hardwood or SCL
CROSSBANDS	1/12" select hardwood with grain running 90Â° to face veneer
FACES	Wood veneer
ADHESIVE	Type II Venners Type I Door assembly
FIRE RATING	20 minute - 1 3/4" thick doors only
DOOR DETAILS	Lite and louver openings not to exceed 54" in length or 40% of the door. Max 1296" for 20 min label
MAXIMUM SIZES	Singles: 3/0, 8/0 Double: 6/0, 8/0

		Machining Sheet		Contact Information
				877-631-9411 Contact Architectural Builders Supply for installation support and information !

CUT SHEET

	TOP and BOTTOM HORIZONTAL EDGE
	2 1/4" minimum solid wood or structural composite lumber, one piece or laminated (before trim)
	VERTICAL EDGE
	1 9/16" minimum hardwood; solid, laminated or veneered (before trim). Backer or inner ply may be structural composite lumber. Same species visible surface, sanded ease, no visible joints allowed


	CORE
	Particleboard, ANSI A208.1, 1-LD2 or 1-LD1
	CORE/EDGE INTERFACE
	Stiles & rails securely bonded to core, then entire unit abrasively planed before veneering

	CROSSBAND
	Edge glued or one piece without voidsor show through
	VENEER FACE
	Rotary Natural Birch and Plain Sliced Red Oak
	VENEER MATCH
	Book, slip or random; Centered, balanced or running; Pair and set match
	LIGHTS, LOUVERS and MOULDING
	Metal vision frames open for 1/4" wired glass or 3/16" Firelite NT glass. Max visible glass 1296 sq in; max width36", mx length 54". Wood lip, wood flush or Metal Vision Panel
	TRANSOMS
	Available
	FIELD TRIM
	Width = Max. 1/2" when taken equally from both stiles
	Height = Max. 1" when taken equally from both rails

Top of page

Cutting Graphic		Cutting Explained
		ROTARY CUT The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple
		PLAIN SLICING The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli
		QUATER SLICING The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied on others
		RIFT CUT Cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter

ABS STANDARD
GRADE DESCRIPTION	"A"
COLOR MATCHING
Sapwood	5%
Heartwood	Yes
Color Streaks or Spots	Yes
Color Variation	Slight
Sharp Color Contrasts at Joints	No
TYPES OF MATCHING
Book Matched	Yes
Slip Matched	Specify
Pleasing Matched	N/A
Random Matched	Specify
End Matched	Specify
Nominal Minimum width of Face Components	Plain Sliced = 5" Quartered = 3" Rotary = 5"
NATURAL CHARACTERISTICS
Small Conspicuos Burls & Pin Knots Combined AVG Number	1 per 22/3 SQ.FT.MAX 12 in and 32 SQ FT. CONTIGUOUS
Conspicuous Burls Max Size	3/8"
Conspicuous Pin Knots AVG Number	1 per 3 SQ. FT. MAX 10 IN AND 32 SQ. FT CONTIGUOUS
Max. Pin Knot Size - Dark Part	1/8"
Scattered Sound and Repaired Knots - Combined Avg. Number	No
Max. Size - Sound	No
Max. Size - Repaired	No
Avg. Number - Repaired	No
Mineral Streaks	Slight
Bark Pockets	No
Worm Tracks	No
Vine Marks	Slight
Cross Bars	Slight