Home > Wood Doors > Architectural Doors > Birch > Architectural Solid Core > RNB-SC3068

RNB-SC3068

3FT x 6FT8IN Architectural Solid Core Birch Wood Door RNB-SC3068

× This image is for a similar product but it will differ in size, color and/or other attributes.

3FT x 6FT8IN Architectural Solid Core Birch Wood Door RNB-SC3068

+ Add to My Wish List

Quote Only Item

This item must be quoted prior to order. Please Contact Us for further details.

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

				Warranty
	Recommended Handing	Glossary	Finishing Tips	Warranty

ABS features a lifetime warranty on our ARCHITECTURAL SOLID CORE rated commercial wood doors.

Our Architectural particleboard wood doors are built to the highest quality standards as defined by AWI section #1300. This door can be special ordered in all domestic and exotic species of wood. Birch, Oak, Maple, Mahogany, Walnut and Cherry can be ordered directly at www.absupply.net. This door meets or exceeds all architectural specifications for construction and quality standards. These doors feature a fully bonded core. This means the stiles and rails are securely attached to the core with adhesives and then are abrasively planed before veneering. This step works to ensure minimal telegraphing of core parts through veneers. These doors are used in commercial, institutional and residential applications. Factory prefinishing, fully compliant with AWI standards, is available on special order. If your machining requirements exceed those listed above, please click on our "machining sheet" link to help complete your order and contact us directly to the place your order. 1 3/8", 2â€, 2 1/4 â€ and other thicknesses available on special order. Dutch doors, wicket doors and lead lined doors can also be special ordered.

ARCHITECTURAL SOLID CORE WOOD DOOR

CONSTRUCTION	Bonded 7 Ply
CORE	Bonded particleboard conforming to ANSI A 208.1 1 LD-2
THICKNESS	1 3/4"
STILES	1 3/8" Matching hardwood or softwood. Wider stiles available
RAILS	1 1/2" Mill option. Wider rails available
CROSSBANDS	1/12" select hardwood with grain running 90Â° to face veneer
FACES	Wood veneer, plastic laminate and MDO
ADHESIVE	Type II (water resistant) Type I (water-proof) available
FIRE RATING	20 minute - 1 3/4" thick doors only
DOOR DETAILS	Lite and louver openings not to exceed 54" in length or 40% of the door. Max 1296" for 20 min label
MAXIMUM SIZES	Singles: 4-0 x 10-0 Pairs: 8-0 x 10-0 DE Pairs: 8-0 x 8-0

Machining Sheet

CUT SHEET

	TOP and BOTTOM HORIZONTAL EDGE
	2 1/4" minimum solid wood or structural composite lumber, one piece or laminated (before trim)
	VERTICAL EDGE
	1 9/16" minimum hardwood; solid, laminated or veneered (before trim). Backer or inner ply may be structural composite lumber. Same species visible surface, sanded ease, no visible joints allowed


	CORE
	Particleboard, ANSI A208.1, grade LD-2
	CORE/EDGE INTERFACE
	Stiles & rails securely bonded to core, then entire unit abrasively planed before veneering
	BACK VENEER
	CROSSBAND
	Edge glued or one piece without voidsor show through
	VENEER FACE
	Minimum 1/50" "A" grade edge glued joints. 1/8" hardboard 60 lb. ANSI A 135.4
	VENEER MATCH
	Book, slip or random; Centered, balanced or running; Pair and set match
	LIGHTS, LOUVERS and MOULDING
	Same species lumber, or vennered or metal vision frames
	TRANSOMS
	Bottom horizontal edge runs full width. Matching species lumber or vennered
	FIELD TRIM
	Width = Max. 1/2" when taken equally from both stiles
	Height = Max. 1 1/2" when taken equally from both rails

Top of page

Cutting Graphic		Cutting Explained
		ROTARY CUT The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple
		PLAIN SLICING The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli
		QUATER SLICING The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied on others
		RIFT CUT cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter

ABS STANDARD
GRADE DESCRIPTION	"A"
COLOR AND MATCHING
Sapwood	Yes
Heartwood	Yes
Color Streaks or Spots	Yes
Color Variation	Yes
Sharp Color Contrasts at Joints	No
TYPES OF MATCHING
Book Matched	Yes
Slip Matched	Specify
Pleasing Matched	N/A
Random Matched	Specify
End Matched	Specify
Nominal Minimum width of Face Components	Plain Sliced = 5" Quartered = 3" Rotary = 5"
NATURAL CHARACTERISTICS
Small Conspicuos Burls & Pin Knots Combined AVG Number	1 per 3 sq. ft. max. 10 in and 32 sq. ft. contiguous
Conspicuous Burls Max Size	3/8"
Conspicuous Pin Knots AVG Number	1 per 8 sq. ft. max. 4 in and 32 sq. ft. contiguous
Max. Pin Knot Size - Dark Part	1/8"
Max, Pin Knot Size - Total	1/4"
Scattered Sound and Repaired Knots - Combined Avg. Number	No
Max. Size - Sound	No
Max. Size - Repaired	No
Avg. Number - Repaired	No
Mineral Streaks	Slight
Bark Pockets	No
Worm Tracks	No
Vine Marks	Slight
Cross Bars	Slight
MANUFACTURING CHARACTERISTICS
Rough Cut	No
Blended Repaired Tapered Hairline Splits	Two 1/16"x 6"
Repairs	Small Blending

SPECIAL CHARACTERISTICS
UNFILLED WORM HOLES, OPEN SPLITS, OPEN JOINTS, OPEN BARK POCKETS, SHAKE OR DOZE NOT PERMITTED IN ABOVE GRADES
ALL DATA REFERENCED FROM A.W.I. 7 TH EDITION, VERSION 1.0.1997 SECTION 1300

Door Handing

Top of page

Questions and Answers

Q: How much does this door way

A: A rough estimate is 130 lbs.

Is there a follow up question that we can perhaps attempt to answer? We take deep pride in our technical expertise, as we know it separates us from our competition, so don't hesitate to ask.

Please reply to this email or contact our sales department here:

Click Here

if we can assist you by answering further questions or with entering this order and please let us know if there is anything else we can help with.

Q: Hi, Is there a push to open latch hardware you'd recommend for a 3-0 x 7-0 solid core door. The door is going to be for a hidden bathroom so you would also need to be able to exit from the inside and latch for privacy. Thank you, Daniel

A: will there be a handle on the push side?

Q: Thank you for the quick reply! There could be a handle on the inside (bathroom side). If you were inside the bathroom the door would open out. The door will have soss hinges. The client wants the outside of the door (hallway side) to be paneled to blend into the wall with no hardware.

A: I would suggest that you consider a roller latch to keep the door in the closed position, then a mortise bolt for the providing of privacy on the interior along with a flush pull on the interior to allow you to pull and push the door

Q: That’s a good idea. So I should stay away from the Ives CL12 type latch?

A: What is the size and weight of the door?

Q: It’s a 2-0 x 7-0 door 24 lbs.

A: The CL12 as seen here:

Click Here

is a great idea.

Thank you for your response and feedback on this job and I stand ready to assist on this or future potential projects.

Q: What if I need glass installed or at least cut out?

A: We can accommodate both of those and any other thing necessary for a door - simply reach out to our sales department for further assistance.

Q: Is the 3070 suitable to use for a pocket door? Top roller mounts only?

A: Yes indeed the 3'0 x 7'0 Architectural Solid Core Birch Wood Door RNB-SC3070 is suitable for a pocket door but they're going to want to be sure to specify the door as square edges so that they do not have a bevel on them and you walk to certainly define your net size requirements as well at the time of order - this may or may not affect the price depending on the special prefix eyes that you have.

(Required, used to email you once question is answered.)

Customers who bought this item also bought: