RNB-PC2868

copy to clipboard

2'8 x 6'8 Particleboard Core Birch Wood Door RNB-PC2868

enlarge
enlarge
× This image is for a similar product but it will differ in size, color and/or other attributes.
2'8 x 6'8 Particleboard Core Birch Wood Door RNB-PC2868
More from ABS
Quote Only Item
This item must be quoted prior to order. Please Contact Us for further details.

1-844-809-3667

Sales
Technical Support
Product Description:
Wood Door
Wood Door
Wood Door
Wood Door
Wood door

Our PARTICLE BOARD CORE DOORS, AWI specification FPC-9, are for standard residential use or economy commercial applications. The standard features of this door are one piece stiles (not finger jointed), particle board core and can be rated for up 20 minute. There doors carry our one year warranty for interior applications. Since not every application calls for an architectural solid core door, this economy door is a dependable alternative. This door is well suited for commercial tenant build-out or commercial retail jobs where cost is a primary concern along with quality. These doors are available 1 3/4" or 1 3/8" thick. Additionally special sizes are also available. Please contact our sales office directly for your custom size door needs


PARTICLE CORE WOOD DOOR
CONSTRUCTION Floating particle core
CORE particleboard which complies with ANSI A208.1 1-LD2 or 1-LD1

THICKNESS

1 3/4", 1 3/8"
STILES 1-1/4" min. (before trim) Structural Composite Lumber (SCL) with compatible veneer band or decoraive laminate
RAILS 2-1/4" min. (before trim) mill option hardwood or SCL
CROSSBANDS 1/12" select hardwood with grain running 90° to face veneer
FACES Wood veneer
ADHESIVE Type II Venners
Type I Door assembly
FIRE RATING 20 minute - 1 3/4" thick doors only
DOOR DETAILS Lite and louver openings not to exceed 54" in length or 40% of the door. Max 1296" for 20 min label
MAXIMUM SIZES Singles: 3/0 x 8/0
Double: 6/0 x 8/0
Wood Door
Wood Door

CUT SHEET
Wood Door TOP and BOTTOM HORIZONTAL EDGE
2 1/4" minimum solid wood or structural composite lumber, one piece or laminated (before trim)
VERTICAL EDGE
1 9/16" minimum hardwood; solid, laminated or veneered (before trim). Backer or inner ply may be structural composite lumber. Same species visible surface, sanded ease, no visible joints allowed
CORE
Particleboard, ANSI A208.1, 1-LD2 or 1-LD1
CORE/EDGE INTERFACE
Stiles & rails securely bonded to core, then entire unit abrasively planed before veneering
CROSSBAND
Edge glued or one piece without voidsor show through
VENEER FACE
Rotary Natural Birch and Plain Sliced Red Oak
VENEER MATCH
Book, slip or random; Centered, balanced or running; Pair and set match
LIGHTS, LOUVERS and MOULDING
Metal vision frames open for 1/4" wired glass or 3/16" Firelite NT glass. Max visible glass 1296 sq in; max width36", mx length 54". Wood lip, wood flush or Metal Vision Panel
TRANSOMS
Available
FIELD TRIM
Width = Max. 1/2" when taken equally from both stiles
Height = Max. 1" when taken equally from both rails
Top of page
Cutting Graphic
Cutting Explained
Wood Door
Wood Door ROTARY CUT
The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple
Wood Door
Wood Door
Wood Door PLAIN SLICING
The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli
Wood Door
Wood Door QUATER SLICING
The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied on others
Wood Door
Wood Door RIFT CUT
Cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter

ABS STANDARD
GRADE DESCRIPTION
"A"
COLOR AND MATCHING
Sapwood
Yes
Heartwood
Yes
Color Streaks or Spots
Yes
Color Variation
Yes
Sharp Color Contrasts at Joints
No
TYPES OF MATCHING
Book Matched
Yes
Slip Matched
Specify
Pleasing Matched
N/A
Random Matched
Specify
End Matched
Specify
Nominal Minimum width of Face Components
Plain Sliced = 5"
Quartered = 3"
Rotary = 5"
NATURAL CHARACTERISTICS
Small Conspicuos Burls & Pin Knots Combined AVG Number 1 per 3 sq. ft. max. 10 in and 32 sq. ft. contiguous
Conspicuous Burls Max Size 3/8"
Conspicuous Pin Knots AVG Number 1 per 8 sq. ft. max. 4 in and 32 sq. ft. contiguous
Max. Pin Knot Size - Dark Part 1/8"
Max, Pin Knot Size - Total 1/4"
Scattered Sound and Repaired Knots - Combined Avg. Number No
Max. Size - Sound No
Max. Size - Repaired No
Avg. Number - Repaired No
Mineral Streaks Slight
Bark Pockets No
Worm Tracks No
Vine Marks Slight
Cross Bars Slight
MANUFACTURING CHARACTERISTICS
Rough Cut No
Blended Repaired Tapered Hairline Splits Two 1/16"x 6"
Repairs Small Blending
SPECIAL CHARACTERISTICS
UNFILLED WORM HOLES, OPEN SPLITS, OPEN JOINTS, OPEN BARK POCKETS, SHAKE OR DOZE NOT PERMITTED IN ABOVE GRADES
ALL DATA REFERENCED FROM A.W.I. 7 TH EDITION, VERSION 1.0.1997 SECTION 1300

Door Handing
Wood Door
Top of page
Questions and Answers
There are currently no questions or answers.
(Required, used to email you once question is answered.)
Customers who bought this item also bought:
Solid Core Wood Door and Metal Frame Complete Unit
Quick combination single WD x HMF
Solid Core Single Wood Door and Metal Frame Unit
ABS
Price: $669.74
Single Metal Door and Frame Complete Unit
Metal Door and Metal Frame Complete Unit
Single Metal Door and Frame Complete Unit
ABS
Price: $756.75
Single Metal Door and Frame Complete Unit
Metal Door and Metal Frame Complete Unit
Single Metal Door and Frame Complete Unit
ABS
Price: $756.75
Trimco 1065-175 605 Pocket Door Pull with privacy function for 1-3/4" doors - Polished Brass
Trimco 1065-175 605
Privacy Pocket Door Pull for 1-3/4" doors, 2-1/2" x 2-3/4", simple to install and field reversible, Material: Polished Brass
Trimco
Price: $14.40
Henderson PF28200A 7296 Pocket Door Frame
PF28200A 7296 Henderson
Henderson PF28200A 7296 Pocket Door Frame 3'0" x 8'0" pocket doors up to 200lbs.
Henderson
Price: $240.30
Architectural Builders Supply Product Suggestions:
Ball BB81 Bearing Standard Weight Hinge
BB81
Commercial hinge for metal & wood doors available in all sizes
ABS
Price: $12.58
Commercial 2'8 x 6'8 Drywall Metal Door Frame
HMF PF416-2868
DISCONTINUED - Metal frame are in place with drywall partitions
ABS
Price: $0.00
Schlage AL50PD SAT 605 Grade 2 Entrance Office Lockset with Saturn Lever - Polished Brass
Schlage AL50PD SAT 605
Schlage AL series lockset with Saturn lever with entrance / office function.
Schlage
Price: $241.11
  • Watch Expert Advice on YouTube
  • Corporate Members of DHI
  • Member of NFPA.
  • Follow us on Facebook
  • AAADM Certified!
  • ALOA Certified!
  • Follow us on Twitter
  • DHI FDAI EDA Inspector
  • AIA
  • Follow us on Pinterest
  • ARL
  • Intertek Logo