Home > Wood Doors > Architectural Doors > Red Oak > Hollow Core > PSRO-HC11080

PSRO-HC11080

1'10 x 8'0 Hollow Core Red Oak Wood Door

× This image is for a similar product but it will differ in size, color and/or other attributes.

1'10 x 8'0 Hollow Core Red Oak Wood Door

+ Add to My Wish List

Quote Only Item

This item must be quoted prior to order. Please Contact Us for further details.

1-844-809-3667

Sales

[email protected]

Technical Support

[email protected]

Product Description:

				Warranty
	Recommended Handing	Glossary	Finishing Tips	Warranty

LEAD TIME

Not every door here is stocked as both 1 3/8" and 1 3/4" thick. Feel free to call us to confirm inventory levels on the exact door size and thickness combination you are looking for.

Our HOLLOW CORE DOORS, AWI specification SHC-7, are for standard residential use or economy commercial applications. The standard features of this door are one piece stiles (not finger jointed), honeycomb core and reinforcing for locksets. There doors carry our one year warranty for interior applications. Not every application calls for a solid core door. This door is well suited for commercial tenant build-out or commercial retail jobs where cost is a primary concern along with quality. These doors are available 1 3/4" or 1 3/8" thick. Additionally special sizes are also available. Please contact our sales office directly for your custom size door needs.

STANDARD HOLLOW CORE SHC

CONSTRUCTION	Floating Cold Press 7 or 9 Ply
CORE	Wood derivative 3/4" strips Ladder or grid core
THICKNESS	1 3/8" or 1 3/4"
STILES	1 1/2" softwood stile (before trim)
RAILS	1 1/2" softwood rail (before trim)
CROSSBANDS	1/16" select hardwood with grain running 90Â° to face veneer
FACES	Wood veneer
ADHESIVE	Type II
FIRE RATING	N/A
DOOR DETAILS	Lock block installed on one side of door. Other blocking available on special order
MAXIMUM SIZES	3/0 x 8/0

CUT SHEET

	TOP and BOTTOM HORIZONTAL EDGE
	1 1/8" minimum solid wood or structural composite lumber, one piece or laminated
	VERTICAL EDGE
	1" minimum solid, laminated or veneered wood. Backer or inner ply may be structural or composite lumber or LVL


	CORE
	Honeycomb fully expanded to edges
	CORE/EDGE INTERFACE
	Stiles & rails securely bonded to core, then entire unit abrasively planed before veneering
	BACK VENEER
	CROSSBAND
	Edge glued or one piece cross band
	VENEER FACE
	Selected hardwoods minimum 1/50", high pressure laminate or medium density overlay. High pressure decorative laminate 0.050" with crossband or 0.125"
	VENEER MATCH
	Book, slip or random; Centered, balanced or running; Pair and set match
	LIGHTS, LOUVERS and MOULDING
	Same species lumber, or vennered or metal vision frames
	TRANSOMS
	Bottom horizontal edge runs full width. Matching species lumber or vennered
	FIELD TRIM
	Width = Max. 1/2" when taken equally from both stiles
	Height = Max. 3/4" when taken equally from both rails

Maximum Door Size			Assembly	Blocking Options
Unrated	Width	Height	Bonded: Floating core construction	Stiles	N/A
Single Leaf	3'0"	8'0"		Rails
Pair	6'0"	8'0"		Lock Block
				Closer Block
				Panic Block
				Standard Custom sized as specified
				Blockings mill option lumber
			Quality Standards Premium Grade per AWI section 1300 SHC	Available Species: All commercially available
Thickness Options			Warranty Interior - 1 year limited Exterior - no warranty	Finishing
1 3/8" unrated				Priming
1 3/4" unrated				Finish painting
				Clear coating
				Standard color staining
				Custom color staining

Top of page

Cutting Graphic		Cutting Explained
		ROTARY CUT The log is mounted centrally in the lathe and turned against a razor sharp blade, like unwinding a roll of paper. Since this cut follows the log's annual growth ring, a bold variegated grain marking is produced. Rotary cut veneer is exceptionally wide. To put it simply, this is the way you peel an apple
		PLAIN SLICING The log, or flitch, is mounted with the heart side flat against the flitch table of the slicer and the slicing is done parallel to a line through the center of the log. This produces a variegated figure. To put it simply this is the way meat is sliced at the deli
		QUATER SLICING The quarter log, or flitch, is mounted on the flitch table so that the growth rings of the log strike the knife at approximately right angles, producing a series of stripes, straight in some wood, varied ion others
		RIFT CUT Cut veneer is produced in the various species of Oak. Oak has medullary ray cells which radiate from the center of the log like curved spokes of a wheel. The rift or comb grain effect is obtained by cutting at an angle of 15 degree of the quarter

ABS STANDARD
GRADE DESCRIPTION	"A"
COLOR MATCHING
Sapwood	5%
Heartwood	Yes
Color Streaks or Spots	Yes
Color Variation	Slight
Sharp Color Contrasts at Joints	No
TYPES OF MATCHING
Book Matched	Yes
Slip Matched	Specify
Pleasing Matched	N/A
Random Matched	Specify
End Matched	Specify
Nominal Minimum width of Face Components	Plain Sliced = 5" Quartered = 3" Rotary = 5"
NATURAL CHARACTERISTICS
Small Conspicuos Burls & Pin Knots Combined AVG Number	1 per 22/3 SQ.FT.MAX 12 in and 32 SQ FT. CONTIGUOUS
Conspicuous Burls Max Size	3/8"
Conspicuous Pin Knots AVG Number	1 per 3 SQ. FT. MAX 10 IN AND 32 SQ. FT CONTIGUOUS
Max. Pin Knot Size - Dark Part	1/8"
Scattered Sound and Repaired Knots - Combined Avg. Number	No
Max. Size - Sound	No
Max. Size - Repaired	No
Avg. Number - Repaired	No
Mineral Streaks	Slight
Bark Pockets	No
Worm Tracks	No
Vine Marks	Slight
Cross Bars	Slight