|
|
|
|
|
|
Home
>
Door Closers
>
Floor Closers
>
Rixson
>
Shallow Depth
>
Metal Door and Frame
>
Non Fire Rated
>
Weight up to 250 lbs.
>
Rixson HM5103 3/4" Offset Shallow Depth Floor Closer
|
| |
|
|
|
Rixson HM5103 3/4" Offset Shallow Depth Floor Closer
|
| Part #: Rixson HM5103 |
| |
| Manufacturer: Rixson |
| Price: $1,214.48 |
| |
| |
|
| |
 |
| |
|
|
|
|
| |
| |
 |
Availability: Made to order. Call for lead time. |
|
|
|
|
Shallow Depth Floor Closers |
|
| |
|
Model HM5103 Shallow Depth Floor Closer |
|
|
|
|
| Application |
| ◊ Single Acting |
| ◊ Interior Doors |
| ◊ Weight to 250 lbs. |
| ◊ Door Width up to 36" |
|
|
Introduction
Rixson’s shallow depth floor closers are
recommended for low to medium traffic
interior doors where traditional floor
closer depth is too great for slab
construction. Not recommended for
high-frequency or exterior doors.
|
|
Features
• Shallow depth case [2"(51mm)] allows
installation in thin slab floor construction
• Separate and independent latch and closing speed valves
• Spindles are removable and can be changed to alter hanging application
• Can be adjusted in cement case upto 3/16"(5mm) forward, backward and sideways with positive locking |
Performance
Hold Open (HO)
Hold open
at 90, 105 or 180° (requires door to swing
approximately 5° beyond hold open point). Closers with hold open cannot be ordered with delayed action
Delayed Action (DA)
Delayed action holds door open at 70° for up to 70 seconds. Closers with this feature will not have backcheck. Delayed action cannot be ordered with hold open closers.
Sealed Closer (SC)
Sealed closer protects it from moisture. Cement cse and closer body are sealed and epoxied together. Closer must be ordered with cement case and shipped together.
Extended Spindle (Ext Spdl)
To accommodate special floor conditions, the spindle can be ordered with longer spindle in 1/2" increments up to and including 2" longer.
Security Screws (Torx)
Security screws.
|
Product Description & Features
Recommended for applications where
vertical movement of the door at installation
is not possible, such as a door inset in a
deep reveal or with no ceiling clearance
• Spring size 3 for 36" door width
• Available non hold-open or 90° or 105° hold
open
• Includes three ball-bearing bronze (4-1/2" x
4-1/2") 3/4" offset hinges
• Supplied with all machine screws and half
wood screws
• For use on any door and frame prepared
for standard weight 4-1/2"(114mm) hinges
• Surface mounted bottom arm allows for
installation on stock hollow metal doors –
no special prep required
• Designed for use on stock hollow metal
doors and frames
• 1-3/4" doors only
• Cycolac cement case
• Will swing to 180°, trim permitting
• Available for floor plate or threshold
installation (floor plate shown)
• Backcheck standard (Not
available on delayed-action model)
• Delayed-action option available
(Not available on backcheck model)
• Doors will swing 5° beyond hold open
point
• 3/4" offset only (measured from centerline
of pivot to face of door) |
Technical Information |
| |
| |
|
|
|
