|
|
|
|
|
|
Home
>
Overhead Stops & Holders
>
Rixson Checkmate
>
Concealed Mount
>
Standard Duty
>
Low Profile
>
Hold Open
>
Butts Offset Pivots
>
Rixson 6-426 Overhead Holder and Stop
|
| |
|
|
|
Rixson 6-426 Overhead Holder and Stop
|
| Part #: Rixson 6-426 |
| |
| Manufacturer: Rixson |
| Price: $234.70 |
| |
| |
|
| |
 |
| |
|
|
|
|
| |
| |
 |
Availability: made to order. Call for current lead time. |
| |
|
|
|
Overhead Holders and Stops |
|
|
| 6-426 Concealed Low Profile, Hold Open Function, Butt Offset Pivot |
|
|
|
|
|
|
|
|
|
|
|
| |
Introduction
Overhead stops are used to protect door assemblies. They cut down the wear and tear of frequency, closing mechanisms, wind
gusts, abuse and vandalism. By limiting the door travel, they can add years to the life of the door, frame, and hanging means.
Overhead holders and friction stays add convenience for the end user who already appreciates the need for the overhead stop. |
Product Description & Features
•Low-profile concealed channel double
acting slide track design
• Multi-function unit is shipped as a stop.
Can be converted to a hold open in field.
666022-PKG (Adapter kit) included
• Torx® screws available
• Designed for installation in aluminum
door webbing
• Non-handed
• Heavy shock absorber spring provides
5°-7° compression before dead stop
• Complete screw packet allows for
wood or metal door and frame
• Standard architectural finishes
• Non-metal slide block
• 110° maximum opening
• 1-3/4" minimum door thickness
• For security areas, Torx® screws
optional
• Track is 1-3/4" wide by 1/2" deep
• UL listed for stop function
|
|
Door Opening Chart (in inches) |
Model Number |
|
Butts Offset Pivots |
Center Hung Pivots |
H.O |
Stop |
Multi |
*24 - 28 |
---- |
6-126 |
6-136 |
6-146 |
|
|
6-226 |
6-236 |
6-246 |
33-1/16 -38 |
36-1/16 - 41 |
6-326 |
6-336 |
6-346 |
38-1/16 - 43
|
41-1/16 - 46
|
6-426 |
6-436 |
6-446 |
43-1/16 - 48 |
46-1/16 - 50 |
6-526 |
6-536 |
6-546 |
*Butt hung only on this size door |
|
|
|
| |
| |
ANSI No. |
H.O. |
STOP |
CO4511
|
CO4541 |
|
|
|
| Typical Installations Concealed Mounting |
|
|
Method A - Standard Installation,
Single Acting
Nos. 1, 2, 5, 6 Series
For single acting doors, the jamb
bracket is mortised into the frame
and the channel mortised into the
top of the door. Both the bracket
and channel are secured with wood
or machine screws.
A cutout for the arm is required on
the stop side of the door only. A
hole must be drilled for the control
knob of the No. 1 Series holder only. |
|
|
|
Method B - Standard Installation,
Double Acting
Nos. 1, 2, 5, 6 Series
For double acting spring hinge and
center hung floor closer or pivot
applications.
Mounting is similar to Method A,
with the exception that the cutout for
the arm is required on both sides of
the door. |
|
|
|
Method C - Inverted Installation,
Single Acting
Nos. 2, 5 Series
Recommended for doors with
minimum top rail depth. The arm
and jamb bracket are mortised into
the door, and the channel is
installed in the header with wood or
machine screws. A cutout for the
arm is required only on the stop side
of the door. |
|
|
|
Method D - Rabbeted Door
Installation, Single Acting
No. 2, 5 Series
The method is designed for 1-3/4"
doors with 1/2" maximum rabbet.
The jamb bracket is mortised into
the door. Wood or machine screws
are used for fastening.
The cutout for the arm is required on
the stop side of the door only. |
|
|
|
|
| | |
