|
|
|
|
|
|
Home
>
Door Closers
>
Automatic Door Openers
>
Push Side Mount
>
Drop Applications
>
Rixson 2915-D Push Side Mount Drop Application
|
| |
|
|
|
Rixson 2915-D Push Side Mount Drop Application
|
| Part #: Rixson 2915-D |
| |
| Manufacturer: Rixson |
| Price: $3,075.96 |
| |
| |
|
| |
 |
| |
|
|
|
|
| |
| |
 |
Availability: made to order. Call for current lead time. |
| |
|
|
|
| 2915-D Push Side Mount
Drop Application
|
|
|
Introduction
The Rixson® 2900 is a “low energy” power door operator designed to automatically open and close doors with a lower
energy opening force.
The American with Disabilities Act (ADA) is a law administered by the U.S. Department of Justice. Its guidelines under ADA
Regulation for Title III are detailed on the ADA website: www.ada.gov.
The 2900 series is a combination overhead operator, combined with a Rixson 27, or 28 floor closer. It is not meant to be used with anything else, as the door would not close otherwise. If it is an overhead opener/ closer you seek, We suggest contacting Norton Door Controls
The Rixson 2900 aids in complying with ADA and ANSI A156.19 requirements. It functions using an A/C motor and hydraulic
pump to activate a heavy-duty floor closer controlled by an Electronic Limit Switch (ELS) circuit board. The Rixson 2900 is your
best choice in a low energy power door operator with its: |
Ease of installation and setup
• Simple instructions
• Uses push-button settings for door open and door close
positions
Application versatility and ease of adjustment
• Push side or pull side mounting units available
• Interfaces with electric hardware and integrates with access
control systems
Allows the floor closer to act normally during close
cycles or if power is turned off
• Critical for fire-rated doors
• Springs force provides the feel of a normal manual door
closer
• Door can be opened manually if desired
Operation startup options
• Wall switches
• Motion sensor
• Radio frequency device
• Push and Go
Hold Open options
• 0-30 seconds (5 seconds minimum required for ADA and
ANSI A156.19)
• Choice of indefinite hold open features
Obstructed Detection
• Door closes if it hits an obstruction while opening
• Door re-opens once if it hits an obstruction while closing |
Functions
• Push Side or Pull Side Applications
• Power Assist selector switch
• Push and Go selector switch
• Open/Close Obstruction Detection
• Motor startup delay adjustment
• Vestibule Function Delay adjustment
(For sequencing two or more units)
• Door Hold Open Delay adjustment
• Single Pole Double Throw (SPDT) Relay Output
• SPDT Relay Output time adjustment
• SPDT Alarm Output
• Blow Open Function for Smoke Ventilation
• Infinite Hold Open function
• Presence Detector Input
• 24 VDC @ 500 mA output
• Selector Mode Switch (3 position)
- OFF – Turns unit off
- ON – Turns unit on
- HOLD OPEN – Activates the unit to the hold
open position indefinitely
Electrical Data
• Power Input 120 VAC, 60 Hz (+10%, -15%)
• Current Draw 2 amp
• Auxiliary Output 24 VDC @ 500 mA
• SPDT relay output for controlling electric strikes or electric
locks not to exceed 1 amp @ 30 VDC |
Certifications
• Americans with Disabilities Act (ADA)
• BHMA 156.19 for Low Energy and Power Assist operated
doors |
|
 |
 |
SERIES |
REVEAL RANGE |
2910-D |
|
(57 to 121mm)* |
|
|
(122 to 187mm) |
| *Reveals less than 2-1/4"(57mm) may be archived by field cutting the adjusting rod |
|
DOOR SWING |
85° |
90° |
95° |
100° |
105° |
MINIMUM DOOR WIDTH (mm) |
36"
(914) |
35"
(889) |
34"
(864) |
34"
(864) |
33"
(838) |
|
|
|
|
| | |
