|
|
|
|
|
|
Home
>
Bathroom Hardware
>
Healthcare Accessories
>
Specimen Cabinets
>
Flush Door
>
Standard
>
Wall Thickness 3" - 5-3/4"
>
Bobrick B-505 Specimen Pass-Thru Cabinet
Home
>
Medical Accessories
>
Specimen Cabinets
>
Flush Door
>
Standard
>
Wall Thickness 3" - 5-3/4"
>
Bobrick B-505 Specimen Pass-Thru Cabinet
| |
|
|
|
Bobrick B-505 Specimen Pass-Thru Cabinet
|
| Part #: B-505 |
| |
| Manufacturer: Bobrick |
| Price: $335.02 |
| |
| |
|
|
| |
 |
| |
|
|
|
|
| |
| |
|
Availability: Ships directly from the manufacturer within 2 weeks of order placement. |
Bobrick B-505 Recessed specimen pass-thru cabinet |
|
| |
| Item # |
Description |
| B-505 |
Bobrick B-505 Recessed Specimen Pass-Thru Cabinet |
|
Specifications: |
|
|
|
Satin-finish stainless steel |
|
Accommodates wall thicknesses 3" - 5-3/4" |
|
Provides convenient passage for specimen from patient area to laboratory |
|
Self-closing doors |
|
Interlocking mechanism prevents both doors from being open at the same time; provides sight barrier |
|
Removable stainless steel tray |
|
Mounts in walls 3" to 5-3/4" (75-145mm) thick
|
|
|
"Bobrick copyrighted product images are used with the permission of Bobrick Washroom Equipment, Inc." |
| |
Installation Instructions:
|
Provide framed rough wall opening 11-1/2" wide x 10-7/8" high (290 x 275mm). Wall thickness may be from 3" to 5-3/4" (75
to 145mm). Allow clearance for construction features that may protrude into rough wall opening. Coordinate with
mechanical engineer to avoid pipes, vents, and conduits. Slide one flange onto cabinet so that screw holes in mounting tabs
are aligned with mounting holes in cabinet. Center cabinet in wall opening. Slide second flange into place, aligning tabs with
mounting holes and making certain entire perimeter of both flanges are tight against wall surface. Open one door and secure
unit with four #10 x 1/4" (4.8 x 6.4mm) mounting screws (not furnished) through cabinet mounting holes and flange tabs at
points indicated by an S
|
Materials: |
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Two slots located on top and bottom for mounting.
Flanges (2) — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn and beveled, one-piece, seamless
construction. One mounting tab with screw hole located on top and bottom.
Doors (2) — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Each door is spring-loaded and secured to
cabinet with a full-length stainless steel piano-hinge. Doors equipped with cast-aluminum pull knob, interlocking mechanism,
and international graphic symbol identifying specimen cabinet.
Spillage Tray — 18-8 S, type-304, 24-gauge (0.6mm) stainless steel. All-welded construction |
|
|
| |
