customer service software technical support
Live Chat
by
Comm100
Home
|
Welcome Guest!
|
Sign In?
|
My Account
|
Contact Us
|
Tracking
|
Order online or call us
773-809-3667
Items in Cart:
0
Items
Sub Total:
$0.00
Access Panels
Bathroom Hardware
Builders Hardware
Complete Door Units
Door & Frame Components
Door Closers
Electrified Hardware
Exit Devices
Fire Safety
Floor Doors
Foodservice Products
Glass
Hinges & Pivots
Key Cabinets
Locksets & Deadbolts
Medical Accessories
Metal Doors
Metal Frames
Millwork
Overhead Stops & Holders
Plumbing
Postal Accessories
Roof Hatches
Sliding Door Hardware
Storage
Tools & Accessories
Trim & Auxiliary
Weatherstripping
Wood Doors
Home
>
Bathroom Hardware
>
Grab Bars
>
Straight
>
1 1/2" Diameter
>
Concealed Mounting
>
Snap Flange
>
Peened grip
>
ASI 3801-36P 36" Straight Grab Bar with Snap Flanges and Peened Grip
ASI 3801-36P 36" Straight Grab Bar with Snap Flanges and Peened Grip
Part #:
ASI 3801-36P
Manufacturer:
ASI
Price:
$38.49
Order Options:
Have you used this item?
Be the first to
Write a Review
1. Select Mounting Kit
Not Required
3901 Dry Wall Anchors (Add $5.96)
3920 Concrete Wall Anchors (Add $8.33)
3931 Dry Wall Anchors with Toggles (Add $5.96)
3932 1/2" Thick Metal Partition Anchors (Add $17.87)
3933 3/4"-1" Thick Metal Partition Anchors (Add $17.87)
3934 Back to Back Mounting Anchors (Add $5.96)
2. Select Anchor Plate
Not Required
3929 In Wall Anchor Plate____________ (Add $17.87)
Comments
(Optional)
Qty:
Availability:
Ships directly from manufacturer within 2-3 business days.
ASI 36" Straight Grab Bar with Snap Flanges and Peened Grip
Snap-on flange covers for concealed mounting
Tubing: 1-1/2′′ (38mm) diameter x 18 gauge (1.2mm)
Flange: 3-1⁄8" (79 mm) diameter, 1⁄8" (3 mm) thick
Flange cover: 3-3⁄16" (81 mm) diameter
Satin stainless steel
Cut Sheet
Dimensions
A = 36"
Strength
Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3, that fabricated product shall be of adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation
Use grab bar as template to mark mounting hole locations and pre-drill holes.
Install bar using two (2) No 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33′′ (840mm) minimum above finished floor (AFF) to 36′′ (915mm) maximum AFF.
Optional Mounting Kits
3901 Dry Wall Anchors
#12 x 2-1/23 long self tapping phillips pan head screws
3930 Concrete or Masonry Wall Anchors
1/4 -20 x 2" long machine screws with matching lead expansion-shields
3931 Dry Wall Anchors with Toggles
1/4-20 x 2" long machine screws with matching toggles
3932 1/2" Thick Metal Partion Anchors
3" (76mm) dia. plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded-onto concealed side
3933 3/4" - 1" Thick Metal Partion Anchors
3" (76mm) diameter plate 1/8" (3mm) thick with two (2) 1/4-20 posts welded onto concealed side
3934 Back to Back Mounting on 1/2" Thick Metal Partition Anchors
For back to back mounting on 1/2" thick metal partitions
1/4-20 x 1-1/4" long machine screws with corresponding hex nuts and washers
Optional Anchor Plate
3929 In Wall Anchor Plate
Anchor is drilled and screwed, welded or wired to face of stud system or partition in exact mounting location to suit field conditions prior to application of finishing wall material.
Steel plate 1/8′′ (3mm) thick x 4′′ (102mm) wide x 44" (1118mm) long
