customer service software technical support
Live Chat
by
Comm100
Home
|
Welcome Guest!
|
Sign In?
|
My Account
|
Contact Us
|
Tracking
|
Order online or call us
773-809-3667
Items in Cart:
0
Items
Sub Total:
$0.00
Access Panels
Bathroom Hardware
Builders Hardware
Complete Door Units
Door & Frame Components
Door Closers
Electrified Hardware
Exit Devices
Fire Safety
Floor Doors
Foodservice Products
Glass
Hinges & Pivots
Key Cabinets
Locksets & Deadbolts
Medical Accessories
Metal Doors
Metal Frames
Millwork
Overhead Stops & Holders
Plumbing
Postal Accessories
Roof Hatches
Sliding Door Hardware
Storage
Tools & Accessories
Trim & Auxiliary
Weatherstripping
Wood Doors
Home
>
Bathroom Hardware
>
Grab Bars
>
Inside Corner Angle
>
Peened
>
ASI 3174P 18-1/8" x 33-1/8" Horizontal Grab Bar with Peened Grip
ASI 3174P 18-1/8" x 33-1/8" Horizontal Grab Bar with Peened Grip
Part #:
ASI 3174P
Manufacturer:
ASI
Price:
$99.90
Order Options:
Have you used this item?
Be the first to
Write a Review
1. Select Mounting Kit
Not Required
3902 Dry Wall Anchors (Add $5.96)
3912 Metal Partition Anchors (Add $32.16)
__________________________________________
Select Shipping Charge
1 - total non-linear grab bar on order (Add $75.00)
2 - total non-linear grab bars on order (Add $37.50)
3 - 5 total non-linear grab bars on order (Add $20.00)
6 - 10 total non-linear grab bars on order (Add $10.00)
11 or more total non-linear grab bars on order
Comments
(Optional)
Qty:
Availability:
Ships directly from manufacturer within 2-3 business days.
ASI 18-1/8" x 33-1/8" Horizontal Grab Bar with Peened Grip
Concealed Mounting
Tubing: 1-1/4" (32mm) diameter x 18 gauge (1.2mm)
Flange: 3" (76 mm) diameter, 1⁄2" (13 mm) deep
Three (3) tamper resistant 1/4-28 stainless steel hex socket set screws supplied for each flange
Satin stainless steel
Cut Sheet
Dimensions
Click for larger image
A
B
C
18-1/8" (460mm)
33-1/8" (841mm)
26-7/8" (683mm)
Strength
Designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-1992 and CFR 28 Part 36, Federal Register Vol. 56 No. 144, 26 July 1991, section 4.21.3 and section 4.26.3
Adequate strength to support a load of 250 pounds (113.4kg).
Mounting to the wall is a critical part of the system to meet this requirement.
To withstand the shear, tension or pull-out, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation
Tenon plates are secured to wall with a 1/4" bolt (by others) through an elongated slot that provides 1" (25mm) vertical range and 3/16" (5mm) horizontal range for fitting adjustment.
Flanges are then fitted over tenon plates and secured by tightening the hex socket set screws (provided).
For compliance with ADA Accessibility Guidelines unit should be installed so that the center line of the grab bar is 33" (840mm) minimum above finished floor (AFF) to 36" (915mm) maximum AFF.
Appropriate anchoring and backing must be provided in accordance with local building codes or as specified prior to wall finishing.
Anchors are available from ASI and must be specified separately (see below).
Optional Mounting Kits
3902 Dry Wall Anchors
#12 x 2-1/2" long self-tapping Phillips pan head screws
3912 Metal Partition Anchors
For installing through 1/2" - 1" metal partitions
3/16′′ (5mm) thick stainless steel plate x 3′′ (76mm) dia., with a 1/4-20 x 1-1/2" (38mm) long threaded steel rod welded on with a washer and nut to suit
